The largest model, “SR-440” is developed to respond to various requirements in maximum performance. It also can be equipped with our “Smart Multi-Labeler”. It is the best choice for mass-production line with readiness to answer to possible variation of your product assortment and design.
It also can perform liquid packaging and gas-filling of your designation.
Multi-Purpose
High Performance
Vacuum Packaging Machine
Dimension (Unit: mm)
SR-440
SR-440 Technical Data
Maximum Film Advance | 550mm (Over 550mm is available as option) |
Maximum Forming Depth | 80mm / 100mm / 150mm (option) |
Film Width | 424 mm - 464 mm (Over 464 mm is available as option) |
Loading Area | It depends on die specification. |
Control System | PLC Control / Servo Motor |
Electrical Voltage | 220V /3P, 380V/ 4p, 50/60hz |
Power Consumption | 220V/25kW, 380V/23kW |
Pneumatic Consumption | 1,000 - 1,500 Liter / Minute, 7 bar |
Water Consumption | 100 - 150 Liter / Hour, 1 bar |
Approximate Weight | 1,000 kg - 1,500 kg |
Packing Capacity | 8 Cycle / 10 Cycle (In case of Booster pump installed) |
Lower Film
Forming Die
Loading Area
Printer
Sealing Die
Upper Film
Cross cutter
Rotary Cutter
Film Shred Outlet
Touch Screen
Pivoting Shaft
Place your cursor on the numbers (①②③….) for each part name to pop up .
- 01. Lower Film in the Loader :
Lower film loader is on the starting point of packaging process. The film is waiting for next step. - 02. Forming Die :
It is where lower film is heated and formed into ‘customized shape’ to contain your products. We can support various patterns (we name them ‘formers’) responding to product design and size. - 03. Loading Area :
This is open area for laborers to fill the products on the customized lower film before sealing with upper film. For automatic process of product loading, it needs to be combined with other system and we can give you an advice. - 04. Multi Printer :
It will print basic information on the film. (Optional) - 05. Sealing Die :
It is where lower film containing your products and upper film will be sealed in vacuity of your designation. - 06. Upper Film
- 07. Cross cutter :
It will cut the sealed films in lateral direction. (90 degrees from the film advance) - 08. Rotary Cutter :
After cross cutting and rotary cutting process, your products will separate in singular unit. - 09. Film Shred Outlet:
It is the path to ‘Suction Collector’.
( To dispose of remnant film after cutting, you can choose one solution between ‘aerodynamic- suction type’ and ‘reel-scraping type’. The picture above is an instance of ‘Suction Collector’ and you can substitute it with ‘Scraping Reels’). - 10. Touch Screen :
Almost every operation of the machine can be controlled by touch screen. At prompt moment, its supportable languages are Korean, English, Chinese and Thai. Anyway, it can support any other font in different language. - 11. Pivoting Shaft :
It supports and rotate ‘Touch Screen’ to the direction for operators’ convenience.